How are Wheelskins Steering Wheel Covers installed?
Each cover comes complete with a nylon lacing cord, a needle, and illustrated detailed installation instructions. The holes are pre-punched with a patented lacing hole reinforcement to prevent tearing during installation. The time required is approximately 60 minutes.
My steering wheel has wide spokes. How do I deal with the spokes during installation?
The illustrated installation instructions show you how to lace around the spokes, how to skip holes at the spokes, or how to use dummy stitches at the spokes. We suggest the dummy stitches if your spokes are 2” wide or wider where they connect to the wheel.
How do I clean and maintain my Steering Wheel Cover?
Your Steering Wheel Cover is made of leather that is specifically tanned and finished for Wheelskins. We recommend that you gently use hand soap and water to remove any surface soil buildup. Avoid all purpose cleaners and protectants that will remove the special finishes and coatings on the leather. Also, most leather cleaners are made for the extremely hard finishes found on upholstery leathers, and these cleaners are unsuitable for the Wheelskins leather. In addition, many perfumes, colognes, and after shave lotions contain alcohol and other chemicals that could harm the leather. We recommend that your hands be free of these substances before you drive.
Leather Steering Wheel Covers by Wheelskins
Since 1977, Wheelskins has manufactured only the finest in genuine leather motoring accessories, with strict emphasis on quality and value. Each of their products are purposely designed to be the best available in their category, and our longtime repeat success with our loyal customer base confirms the wisdom of our approach.
Wheelskins are the finest, most luxurious Genuine Leather Steering Wheel Covers available. They are individually hand-crafted in California of choice domestic cowhide, especially tanned for Wheelskins. Our exclusive patented lacing hole reinforcement system ensures a tight custom fit on any steering wheel.
Easy to install, Wheelskins are the best way to inexpensively customize and upgrade any plastic steering wheel. They are also the premier option for replacing a damaged or worn original factory leather covered wheel.
Wheelskins has long been a key supplier to the specialty automotive aftermarket, serving New Car Dealers, Upscale Accessory Stores, Upholstery & Trim Shops, and Catalog and Internet Retailers. As a Wheelskins customer, you can expect to receive consistently well made products, shipped on time, with universal customer satisfaction.
Common Questions:
How are Wheelskins Steering Wheel Covers installed?
Each cover comes complete with a nylon lacing cord, a needle, and illustrated detailed installation instructions. The holes are pre-punched with a patented lacing hole reinforcement to prevent tearing during installation. The time required is approximately 60 minutes.
My steering wheel has wide spokes. How do I deal with the spokes during installation?
The illustrated installation instructions show you how to lace around the spokes, how to skip holes at the spokes, or how to use dummy stitches at the spokes. We suggest the dummy stitches if your spokes are 2” wide or wider where they connect to the wheel
How do I clean and maintain my Steering Wheel Cover?
Your Steering Wheel Cover is made of leather that is specifically tanned and finished for Wheelskins. We recommend that you gently use hand soap and water to remove any surface soil buildup. Avoid all purpose cleaners and protectants that will remove the special finishes and coatings on the leather. Also, most leather cleaners are made for the extremely hard finishes found on upholstery leathers, and these cleaners are unsuitable for the Wheelskins leather. In addition, many perfumes, colognes, and after shave lotions contain alcohol and other chemicals that could harm the leather. We recommend that your hands be free of these substances before you drive.
