Ask anyone who has them and they'll tell you that heated seats help relieve poor circulation on long drives and makes a cold winter day much more bearable. Available with carbon fiber heating elements, Seat Heaters are easily installed under the factory or aftermarket seat fabric or leather.
ABOUT Carbon Fiber Seat Heater
Carbon fiber offers the best in heat distribution and overall temperature consistency. High/low round switch and dual zone heating for the back and seating areas. The elements can be cut to length and holes can be cut into the element for attachment access without affecting performance. Carbon Fiber is pliable and a good conductor of electricity which can be designed to incorporate a variety of shapes which are interconnected and form a matrix / grid which can be sewn over.
Type: Carbon Fiber / Felt Panels
Each panel 10" (266mm) X 20" (500) - 104 Degree F (40C)
Element can be trimmed to the desired Length or altered to accommodate seat attachments.
Power: 12V / 4.7 Amp/60W Heat
24" (600mm) Power Leads to Seat Harness
The Carbon fiber heater comes with the following switch;
"Hi" setting: 104 - 108 degree (+/- 4 degrees).
"Lo" setting: 98 - 102 degree (+/- 4 degrees).